Ieee488.2 Common Commands; Command Summary - THORLABS PM100USB Operation Manual

PM100USB

7.1.2 IEEE488.2 Common Commands

Common commands are device commands that are common to all devices according to the
IEEE488.2 standard. These commands are designed and defined by this standard. Most of the
commands are described in detail in this section. The following common commands associated
with the status structure are covered in the "Status Structure" section: *CLS, *ESE, *ESE?,
*ESR?, *SRE, *SRE?, *STB?

7.1.2.1 Command Summary

Mnemonic Name
*CLS Clear status
*ESE
Event enable command
<NRf>
Event enable query
*ESE?
*ESR? Event status register query
*IDN? Identification query
Operation complete command
*OPC
*OPC? Operation complete query
Reset command
*RST
*SRE Service request enable com-
mand
<NRf>
*SRE? Service request enable query
*STB? Status byte query
Self-test query
*TST?
*WAI Wait-to-continue command
22
Description
Clears all event registers and Error Queue
Program the Standard Event Enable Register
Read the Standard Event Enable Register
Read and clear the Standard Event Register
Read the unit's identification string
Set the Operation Complete bit in the Stand-
ard Event Register
Places a "1" into the output queue when all
device operations have been completed
Returns the unit to the *RST default condition
Programs the Service Request Enable Re-
gister
Reads the Service Request Enable Register
Reads the Status Byte Register
Performs the unit's self-test and returns the
result.
Wait until all previous commands are ex-
ecuted
© 2020 Thorlabs