Permanent Removal - Safe SC 510 User Manual

Temporary removal
Push the Removal Tool (T) up underneath the
top hinge, and lift the Gate vertically.

Permanent removal

Complete steps as for temporary removal.
Undo the Screws on the Top Lock and remove
the top cap and magnet lock.
14
UK
To close the Gate, lift the handle and drop the
locating pins onto the Locking Rail. The window
in the handle will show green to indicate that
the Gate is securely locked.
Note: The red line on the top, next to the
locking catch, should not show when the Gate
is locked. If it starts to show, readjust the width
of the Gate (Steps 16-21).
To replace the Gate, simply drop the 2 locator
pins of the Gate Panel back onto the Hinge Rail
ensuring that it 'clicks' securely back into place.
Undo the 4 Screws attaching the Rails to the
wall.