Safe SC 510 User Manual page 13

Using the Optional One-Way Stopper
IMPORTANT: If the Gate is located at the top of stairs, the one-way Stopper must be installed so
that the Gate cannot open over the stairs.
Use the optional One-way Stopper if you want
to open the Gate in one direction only. Use both
Allen Keys to remove the bolt on the handle that
is closest to the opening edge (keep the small
Barrel Bolt in a safe place for future use, and
reuse the small screw in step 3).
To open and close the gate
UK
Choose either the left or right One-Way Stop-
per (U1). Position it on the side of the Gate that
does want to open. The small lip fits under the
bottom of the handle and the curved end faces
towards the Locking Rail.
Pass the Long Barrel Nut (U2) through the ho-
les in the One-Way Stopper and the handle, and
bolt securely together using the screw from
step 1. Check that the Gate remains correctly
adjusted (Steps 16-21).
To open the Gate, holding the handle, use your
thumb to slide the locking catch on the top of
the Gate Panel back towards the handle, and
simultaneously lift the Gate to swing it open.
The window in the handle will show red when
the Gate is open.
13