GRASS VALLEY NV9605 User Manual page 53

Press the setup button to proceed to the first part of setup which is to set the panel ID:
The panel now allows you to enter the panel ID using buttons at the left that function as a
numeric keypad. The numbers of the keypad a printed on the panel. They range from 0 (at
the left) to 9:
Press the setup button to complete the entry. A confirmation message appears:
Press 1 (the button on the left) to cancel your entry or press 2 (the button on the right) to
save your entry. Thereafter, your panel will have the panel ID you assigned, unless you or
someone else changes it.
If you do not want to change the panel ID, just press the setup button again, without
entering a number, to proceed to the next step.
Following the panel ID is the display of the software version:
The software part number and its revision number wrap around the first two lines of the
display. In the illustration above, the part number is SV0639-07 and the revision is A0. The
CPLD version number is 00.
Press the setup button to proceed to the pixel test:
In this test, all the dots in each character of the 2 displays should be illuminated.
Press the setup button to proceed to the color test. This test has 4 parts:
• All buttons turn low-tally amber.
• All buttons turn high-tally amber.
• All buttons turn low-tally green.
P a n e l I D
0
P a n e l I D
_ _ _ _ _ 1 2 3
0 C a n c e l
1 S a v e
S V 0 6 3 9 - 0
7 A 0
NV9605
User's Guide
45