Table of Contents
Advertisement
Configuration
NV9605 Panel Configuration Page
NV9605 Panel Configuration Page
This is the default NV9605 panel configuration page in NV9000-SE Utilities:
Panel Image:
Button
Definition
Section
GPIO
Definitions
Fig. 4-1: NV9605 Configuration Page (Default)
After you configure buttons the appearance of the panel buttons will have changed. The
panel buttons on this page will show legends, determined from the button type assigned
to the button. (The panel's actual buttons have clear plastic keycaps that you can remove
and insert button legends, graphic or text, of your own design.)
At the bottom of the page are two important configuration buttons: 'Revert to Saved' and
'Save' . The 'Save' button commits modifications you have just made. The 'Revert to Saved'
button restores the last saved version of the panel configuration, canceling any changes
you just made.
Regions of the Configuration Page
Above the 'Revert to Saved' and 'Save' buttons (always present) there are 4 main regions:
• A graphic representation of the NV9605 panel.
Configurers must click a button "proxy" to select the button for configuration.
• Button definitions.
In this section, configurers make button assignments, using its pull-down menus and
text fields. See
• Panel options.
In this section, configurers may specify the behavioral characteristics of the panel. See
Panel
16
Button
Definitions, following.
Options, following.
Panel
Options
Advertisement
Table of Contents
