GRASS VALLEY NV9605 User Manual page 22

Configuration
Adding a Panel to an NV9000 Configuration
After launching NV9000-SE Utilities, choose 'Control Panels' from the Configuration pane in
the navigation area. The 'Control Panels' configuration page appears:
Click 'Add Control Panel' at the bottom of the configuration page. The 'Add Control Panel'
page appears:
Choose "NV9605" from the 'Type' field. In the ID field, enter the panel ID you assigned to the
panel while it was in setup mode. (You can change the panel ID in NV9000-SE Utilities.) Give
a name to the panel in the name field and select a user.
When you are creating a panel configuration you have 3 options. These options are
presented in the 'Configuration Options' area:
1 Make a copy of an existing configuration file, giving it a new file name.
2 Use an existing configuration file. (This allows several panels to share a single
configuration.)
3 Create an entirely new configuration file.
14