Power Module - Huawei OceanStor 2600 V3 Product Description

OceanStor 2600 V3
Product Description
No.
14
15
17
18
19

4.2.2.3 Power Module

Power modules can ensure that the controller enclosure works correctly in maximum power
consumption mode. The controller enclosure supports both AC and DC power modules.
Appearance
Figure 4-15
module respectively.
Issue 09 (2019-05-15)
Indicator
Power indicator of the
controller
Alarm indicator of the
controller
Indicator of the mini SAS
HD expansion port
Link/Active indicator of
the GE electrical port
Speed indicator of the GE
electrical port
and Figure 4-16 show the front view of an AC power module and a DC power
Copyright © Huawei Technologies Co., Ltd.
Status and Description
l Steady green: The controller is powered on.
l Blinking green (0.5 Hz): The controller enclosure
is powered on and in the BIOS boot process.
l Blinking green (2 Hz): The controller is in the
operating system boot process, or the controller is
in the power-off process.
l Off: The controller is absent or powered off.
l Steady red: An alarm is generated on the
controller.
l The Alarm indicator blinking red and the Power
indicator blinking green: The controller is being
located.
l Off: The controller is working correctly.
l Steady blue: Data is transferred to the
downstream disk enclosure at the rate of 4 x 12
Gbit/s.
l Steady green: Data is transferred to the
downstream disk enclosure at the rate of 4 x 3
Gbit/s or 4 x 6 Gbit/s.
l Steady red: The port is faulty.
l Off: The link to the port is down.
l Steady green: The link to the application server is
normal.
l Blinking green: Data is being transferred.
l Off: The link to the application server is down or
no link exists.
l Steady orange: The data transfer rate between the
storage system and the application server is 1
Gbit/s.
l Off: The data transfer rate between the storage
system and the application server is less than 1
Gbit/s.
4 Hardware Architecture
27