Set Dip-Switches - Skoda iV Charger Manual

EN

6. SET DIP-SWITCHES

The power board has two groups of 5-pin DIP-switches:
▶ Group A determines the coil type used for the current transformer and defi nes the
ground loss monitor functionality.
▶ Group B determines the maximum available current of the facility/house, or of the
wallbox itself, depending on the group A confi guration.
In the following illustrations and tables, the upper switch position is being referred to as posi-
tion 1, whereas the lower switch position is being referred to as position 0.
DIP-switch positions:
Example of DIP-switch setting: 0, 0, 0, 1, 1
36