Install Wall Bracket - Skoda iV Charger Manual

Caution
A front assembly with cracks in the glass can cause the wallbox to become a hazardous
object, and thus result in the risk of injuries.
▶ If the glass of the front assembly breaks, have the front assembly replaced
immediately by a qualifi ed electrician.
Not taking precautions against ESD (Electrostatic discharge) can damage electronic
components in the wallbox.
▶ Take the necessary precautions against ESD before touching electronic
components.
Using other materials than specifi ed in this manual for installation, operation, mainte-
nance and/or service of the wallbox can result in damage to the wallbox.
▶ Do not use other materials than specifi ed in this manual, especially materials
containing silicone or phosphorus, as they can damage the wallbox.

5.1 Install wall bracket

B 5.1 See the corresponding illustrations in manual B.
1. Place the wall bracket on the wall and use a bubble level to align it. Make sure
that the UP arrow on the bracket points upwards.
2. Mark the positions of the three attachment holes on the wall.
3. Prepare the attachment holes.
a. Drill the three attachment holes.
b. Insert wall plugs.
4. Mount the wall bracket on the wall using the three screws M6 x 60 mm and
three washers 6.5 mm x 14 mm.
EN
29