Table Of Contents - Ingenico iWL250B Manual
Emv certified pin pad
Hide thumbs
Also See for iWL250B:
- User manual (48 pages) ,
- Quick reference manual (28 pages) ,
- User manual (53 pages)
Table of Contents
Advertisement
Important Notes - Please Read!
CRE must be on version 12.8019 or higher to use the iWL250B
Each iWL250B device needs its own wired internet connection (unique IP address). It cannot use the same internet cable
connected to the PC. Prior to installation, make sure there are enough additional internet connections for each PAX device
you will be installing.
Each register running card transactions must have its own iWL250B device; iWL250B devices may not be shared among
registers.
Credit card settlements must be done in CRE on every station where an iWL250B device is connected and you must enter a
password on the PIN pad to begin the settlement.
The iWL250B device must have settings pre-configured and installed by your payment processor prior to integration with
CRE.
Auto-settlement is NOT recommended if taking tips on the iWL250B.
Any instructions relating to the iWL250B PIN pad in this document are applicable to the iWL 252 PIN pad.
TABLE OF CONTENTS
4
10
13
16
20
21
22
23
24
27
30
32
33
2 |
P a g e
Advertisement
Table of Contents
Need help?
Do you have a question about the iWL250B and is the answer not in the manual?