Ingenico IWL 250 Download Manual
  1. Manuals
  2. Brands
  3. Ingenico Manuals
  4. Touch terminals
  5. IWL 250
  6. Download manual

Ingenico IWL 250 Download Manual

Hide thumbs Also See for IWL 250:
1
2
3
4

Advertisement

Table of Contents

How do I download the OS and Baseline file from a USB device for my
Telium?
For iWL250 devices, you will need an accessory cable that does not come with the unit or
base for this. The cable can be ordered from hardware providers. It will be a male micro
USB to female USB adapter cable.
Follow these instructions to download the OS and Baseline for a Telium device:

Downloading the OS and Baseline files

1. Download the OS and Baseline to your PC.
iCTxx Native OS/BASELINE files located here.
o
iCTxx Universal App OS/Baseline files located here.
o
iWLxx Native OS/BASELINE files located here.
o
iWLxx Universal App OS/Baseline files located here.
o
2. Unzip the files to a folder on your PC
3. Place the unzipped OS and Baseline files inside of a folder called TELIUM.
4. Copy the TELIUM folder and its contents to the USB drive. It must be in the topmost directory in
the USB drive.

Clear the OS and Baseline from the device

1. Power cycle the device by pressing the yellow Clear key and the '#' key at the same time.
2. For battery-powered Telium's, press the Enter key to power them back on. For other units, skip
to step 3.
3. Immediately press and hold the F1 key until a "*" appears.
4. Immediately press the F4 key until another "*" appears.
5. Immediately press the Down arrow until another "*" appears.
6. Finally press the Up arrow until you see "****" on the screen.
7. LLT will appear on the screen.

Installing files from the USB drive

1. Plug the USB stick with the OS and Baseline in to the Telium device.
2. Reboot the terminal by pressing the yellow Clear key and the '#' key at the same time.
3. For battery-powered Telium's, press the Enter key to power them back on. For other units, skip
to step 4.
4. Immediately press and hold the F4 key.
5. USB MASS STORAGE will appear on the screen, then the applications that can be installed will be
displayed.
6. Select the appropriate application to install and press the Enter.
7. Your device will start installing the component selected.
Download Guide for IWL 250

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IWL 250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ingenico IWL 250

Summary of Contents for Ingenico IWL 250

  • Page 1 Download Guide for IWL 250 How do I download the OS and Baseline file from a USB device for my Telium? For iWL250 devices, you will need an accessory cable that does not come with the unit or base for this. The cable can be ordered from hardware providers. It will be a male micro USB to female USB adapter cable.
  • Page 2 8. Repeat steps in this section to download the Baseline application after you complete the OS download. How do I configure the Telium TMS Screen for IP Remote Download? **Note: If using a 16MB iCT or iWL (Splash screen will say *A98 instead of *C98), you must 'Delete SW' from TADU prior to completing the steps below, click here for those...
  • Page 3 18. Highlight Download and press Enter. The download will progress at 10% intervals and will display a '*' at each interval. 19. When the download is complete the device will go back to the Idle screen. OS and Baseline download: iWLs Only (For iCTs, jump to next step): 1.
  • Page 4 Press the F key to access the Function Menu 2. Select 0 (Telium Manger) 3. Select 3 (Initialization) 4. Select 1 (Parameter) 5. Press the F4 key to arrow down, and then Select T.M.S 6. Select IP/Eth 7. Select SSL= No 8.

Table of Contents