Washing Programmes - Atag VA6111RT User Manual

Table of Contents

Advertisement

Available languages

Available languages

34
– When the countdown is completed,
the washing programme starts auto-
matically.
The opening of the appliance door inter-
rupts the countdown. When you close
the door, the countdown continues
from the point of interruption.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
How to cancel a washing programme
or a delay start
If a washing programme or a delay
start has not started, you can change
the selection.
When a washing programme or a delay
start are in progress, it is not possible
to change the selection. It is necessary
to cancel the washing programme or
the delay start to make a new selection.
When you cancel the delay start, this au-
tomatically cancels the selected wash-
ing programme. You have to select the
washing programme again.
1. Press and hold the function buttons B
and C until the display shows two hori-
zontal bars.
2. Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.

Washing programmes

Washing programmes
Programme
1
Automatic 45 - 70
°C
1)
2
Intensive 70 °C
Degree of soil
Any
Crockery, cutlery,
pots and pans
Heavy soil
Crockery, cutlery,
pots and pans
At the end of the washing programme
• The appliance stops automatically.
• The audible signals operate.
1. Open the appliance door.
– The display shows 0.
– The end-of-programme indicator light
is on.
2. Switch off the appliance.
3. For better drying results, keep the door
ajar for some minutes.
• If you do not switch off the appli-
ance, after three minutes from the
end of the washing programme:
– all indicator lights go off,
– the display shows one horizontal
bar,
– the optical signal goes off.
This helps to decrease energy con-
sumption.
Press one of the buttons (not the on/off
button), the display and the indicator
lights come on again.
Remove the load
• Let the dishes become cold before you re-
move them from the appliance. Hot
dishes are easily damaged.
• First remove the items from the lower bas-
ket, then from the upper basket.
• There can be water on the sides and
door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
Type of load
Prewash
Main wash 45 °C or 70 °C
1 or 2 middle rinses
Last rinse
Dry
Prewash
Main wash 70 °C
1 middle rinse
Last rinse
Dry
Programme description

Advertisement

Table of Contents
loading

Table of Contents