Washing Programmes - Atag VA6311RF User Manual

32
Starting the washing programme with
delay start
You can set the delay start with the ap-
pliance door open or closed.
If the door is open, you can change the
setting because the appliance starts to
operate only after you close the door.
If the door is closed, the appliance
starts to operate after 3 seconds from
the setting of the delay start.
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
3. Press the delay start button again and
again until the display shows the time of
the delay start.
• The delay time flashes in the display.
4. Close the appliance door, the count-
down starts automatically.
• The delay time flashes no more in the
display.
• The phase indicators of the set wash-
ing programme go off.
When the countdown is completed, the
washing programme starts automatically.
The indicator of the phase in operation
comes on.
The opening of the appliance door
stops the countdown. When you close
the door, the countdown continues
from the point of interruption.
Cancelling the delay start
The countdown is not operating
1. Press the delay start button again and
again until the display shows the time of
the washing programme.
2. Close the appliance door, the washing
programme starts automatically.
The countdown is operating
1. Press the delay start button again and
again until the display shows the time of
the washing programme.

Washing programmes

Programme
1)
Type of soil
All Crockery, cutlery,
pots and pans
• The programme time flashes in the
display. After some seconds, the time
stops to flash and the washing pro-
gramme starts automatically.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while the washing
programme operates, it is necessary to
cancel the programme.
• Press and hold function button (B) and
function button (C) at the same time until
all the programme indicators come on.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, the display shows a zero and the end
indicator is on.
1. Deactivate the appliance.
2. Open the appliance door.
For better drying results, keep the ap-
pliance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
Type of load
Prewash
Wash 45 °C or 70 °C
Rinses
Dry
Programme description