Unloading The Dishwasher; Washing Programmes - Atag VA6311QF User Manual

3. Press the start/cancel button, the count-
down of the delay start begins automati-
cally. The phase indicator lights go off.
Once the delay start countdown has elapsed
the washing programme will automatically
start.
• Delay start indicator light goes off.
• Indicator light of the running phase comes
on.
Opening the door will interrupt the
countdown. Once the door is closed the
countdown will continue from the point
at which it was interrupted
Cancel a delay start in progress
1. Press the start/cancel button for about 5
seconds.
– Start/cancel and delay start indicator
lights go off.
– Phase indicator lights start flashing.
2. Press start/cancel button to start the se-
lected washing programme.
Warning! Interrupt or cancel a
washing programme in progress
ONLY if it's absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.

Unloading the dishwasher

• Hot dishes are sensitive to knocks. The
dishes should therefore be allowed to cool
down before removing from the appliance.
• Empty the lower basket first and then the
upper one; this will avoid water dripping
from the upper basket onto the dishes in
the lower one.
• Water may appear on the sides and the
door of the dishwasher as the stainless

Washing programmes

Programme
Intensive 70°
Degree of soil Type of load
Crockery, cutlery,
Heavy soil
pots and pans
Interrupt a washing programme in
progress
Open the dishwasher door; the programme
will stop. Close the door; the programme will
start from the point at which it was interrup-
ted.
Cancel a washing programme in
progress
• Press the start/cancel button for about 5
seconds. The start/cancel indicator light
goes off and the phase indicator lights are
flashing. The running programme has
been cancelled and it is now possible to
set a new washing programme or switch
off the machine. If a new washing pro-
gramme is to be selected, check that there
is detergent in the detergent dispenser.
End of the washing programme
• The dishwasher will automatically stop.
• The End indicator light comes on.
1. Switch off the dishwasher by returning
the programme knob to the Off position.
The On/Off indicator light goes off.
2. Open the dishwasher door, leave it ajar
and wait a few minutes before removing
the dishes; in this way they will be cooler
and the drying will be improved.
steel will eventually become cooler than
the dishes.
When the washing programme has
finished, it is recommended that the
dishwasher is unplugged and the
water tap turned off.
Programme description
Prewash
Main wash
2 intermediate rinses
Final rinse
Drying
71