Loading Cutlery And Dishes - Atag VA6111RT User Manual

30
To deactivate the multitab function and use
separately detergent, salt and rinse aid:
1. Press the multitab button. The multitab
indicator light goes off.
2. Fill the salt container and rinse aid dis-
penser.
3. Adjust the water hardness setting to the
highest level.

Loading cutlery and dishes

Hints and tips
Do not use the appliance to clean objects
that can absorb water (e.g. sponges, house-
hold cloths).
• Before you load cutlery and dishes, follow
these steps:
– Remove remaining food.
– Make remaining burnt food in the pans
soft.
• While you load cutlery and dishes, follow
these steps:
– Load hollow items (e.g. cups, glasses
and pans) with the opening down.
– Make sure that water does not collect
in the container or in a deep base.
– Make sure that cutlery and dishes do
not bond together.
– Make sure that the glasses do not
touch other glasses.
– Put small objects in the cutlery basket.
– Mix the spoons with other cutlery to pre-
vent them from bonding together.
– Arrange the items to let water touch all
surfaces.
• Plastic items and pans with non-stick
coatings can retain the water droplets.
• Put light items in the upper basket. Make
sure that the items do not move.
Lower basket
Put the saucepans, lids, plates, salad bowls
and cutlery in the lower basket. Arrange the
service dishes and large lids around the
edge of the basket.
4. Do a washing programme without
dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the rinse aid dosage.
The rows of prongs in the lower basket can
be flat to load pots, pans and bowls.