Data Dictionaries; Table 9-6. Tl1 Editing Data Dictionary For Ds3 - ADTRAN MX2800 M13 User Manual

Adtran network adapter user manual mx2800 m13
Table of Contents

Advertisement

Section 9, Transaction Language 1 (TL1)

Data Dictionaries

The data dictionaries that follow are to be used while performing TL1 editing or retrieve commands. Each
data dictionary contains four columns. The columns are as follows:
• Keyword gives the values to be placed in the <keyword> portion of the edit command.
• Type describes the type of <value> that is required to be entered in the edit command.
– ENUM requires a text and/or number string to be entered as the <value>.
– Y/N requires a
Y
– INT requires that an integer be entered as the <value>.
• Domain describes valid entries that may be entered into the <value> portion of the edit command.
• Description explains each of the edit or retrieve commands.
Table 9-6
contains entries that are used to edit or retrieve options for the DS3 portion of the MX2800.
When performing TL1 edit commands from this table, the value of
should be one of the following:
• 300 for all DS3 Circuits
• 301 for DS3 #1
• 302 for DS3 Control Card A
• 303 for DS3 Control Card B
Keyword
ACTIVECONTROLLER
CARDSWRLY
DIAGDS3
DS3AISRLY
9-20
or
representing yes or no to be entered as the <value>.
N

Table 9-6. TL1 Editing Data Dictionary for DS3

Type
Domain
ENUM
One of the following:
• A
• B
Y/N
Y or [N]
ENUM
One of the following:
• DATAMODE
• LINELPBK
• DIGLPBK
• METLPBK
• REMLPBK
• ALLT1
Y/N
Y or [N]
MX2800 M13 Multiplexer User Manual
should be T3, and the
rr
Description
Selects which controller card is active
• controller card A is active
• controller card B is active
Identifies status of System Protection Switch
alarm relay
• Yes (Y) - enables alarm
• No (N) - disables alarm
Enables the selected DS3 loopback
• Refer to
Data Mode
on page 6-2
• Refer to
Line Loopback
• Refer to
Digital Loopback
• Refer to
Metallic Loopback
• Refer to
Remote Loopback
• Refer to
Remote All T1/E1
Identifies status of DS3 AIS alarm relay
• Yes (Y) - enables alarm
• No (N) - disables alarm
value
<aid>
on page 6-7
on page 6-7
on page 6-8
on page 6-8
on page 6-8
61200290L1-1G

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents