Setup K450 Installation Safety Instructions - VeriFone K450 Installation Manual

Table of Contents

Advertisement

Setup
K450 Installation
Safety
Instructions
This chapter describes the setup procedure for the K450 in the following sections:
K450 Installation Safety Instructions
Inside the Shipping Carton
Installing K450
Do not attempt to install this product until all the instructions and warnings have
been read and properly understood.
1
Please check carefully to make sure there are no missing or defective parts -
defective parts must never be used.
2
Verifone is not liable or responsible for damage or injury caused by improper
installation, improper use or failure to observe these safety instructions. In
such cases warranty might get void.
Product Location
1
When determining location, ensure that all access doors and panels are
accessible and have enough room to fully open or remove. Ensure that users
can comfortably walk up to and use the kiosk without obstructions.
2
Do not install the kiosk near electrical or explosive hazards or where there are
falling objects else excessive dust and debris will get collected on the kiosk.
3
Do not operate or service the unit unless it is securely mounted to a fixed
surface or stable structure. Failure to mount securely can cause injury or
damage to the kiosk.
Floor Mounting
1
Please ensure to install K450 unit on a suitable, hard, stable floor or surface.
2
K450 unit must be secured to the surface with provided anchor bolts or other
suitable anchors for its intended use. Notify Verifone if you have questions
about your floor or mounting hardware.
Wall Mounting
1
Please ensure to install K450 unit on a suitable wall.
C
HAPTER
K450 I
G
NSTALLATION
UIDE
3
15

Advertisement

Table of Contents
loading

Table of Contents