Table of Contents
Advertisement
S
ETUP
Installing K450
24
K450 I
NSTALLATION
2
Align the inside divider plate in the top pole extension with the divider in the
top pole with the "POWER ONLY" labels on the same side. Slide the top pole
extension onto the top pole until it stops.
3
Attach top pole extension to top pole with included thread-forming screws.
Align holes in extension to holes in top pole and secure with screws.
4
Turn the poles over and install screws to remaining side.
STEP 2: CONNECT POWER + DATA LINES
Run power and data lines through poles. If lines run into interference at the
junction of the two poles, remove screws and slide top pole extension away from
top pole.
STEP 3: SECURE TOP POLE EXTENSION TO CEILING
Use the provided ceiling mounting bracket or other sufficient method to secure the
top of the extension to the facilities ceiling structure.
G
UIDE
Advertisement
Table of Contents
