Cleaning Prior To Initial Use - Whirlpool 7LIECK-W-WL User Manual

CLEANING PRIOR TO INITIAL USE

To remove any odors or dust that may have accumulated during shipment, you
must clean the dispenser prior to first use.
DO NOT PLUG THE COOLER INTO AN ELECTRICAL POWER OUTLET
Time Required: 40 minutes.
1. Remove the bottle receptacle by turning it counterclockwise
and pulling up. Store in a safe place.
2. Remove the plastic baffle from inside the reservoir. Clean
with warm soapy water, rinse, then store in a safe place.
3. Fill the reservoir with a mixture of 1 gallon tap water and 2
tablespoons of unscented household bleach.
4. Let sit for 30 minutes.
5. Remove the cleaning mixture from the reservoirs by dispensing the mixture from both taps
into a pitcher.
6. Wipe the inside of the reservoir with a soft cloth.
7. Fill the reservoir with 1 gallon tap water.
8. Remove the water from the reservoir by dispensing it from both taps into a pitcher.
9. Replace all parts.
10. Complete the installation and follow the operation instructions indicated in this manual.
11. Repeat rinsing cycle if chlorine taste persist.
If your water has an off-taste, do not return the dispenser to the store. Call 1-855-5WHIRL5
for assistance.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5WHIRL5 for assistance.
Model # 7LIECK-W-WL: Page 7