Installing The Correct Bottle Receptacle - Whirlpool 7LIECK-W-WL User Manual

INSTALLING THE CORRECT BOTTLE RECEPTACLE

If your water bottle
looks like this
This model comes with a Probe Receptacle (1). No changes are required. The probe
will push the plug out of the way when you place the bottle into the receptacle.
If your water bottle
looks like this
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5WHIRL5 for assistance.
1. Remove the bottle receptacle (1) by turning it
counterclockwise and pulling it up.
2. Remove the collar (2) from the foam packa-
ging or bag in the front of the dispenser.
3. Align the tabs.
4. Turn clockwise to secure.
Model # 7LIECK-W-WL: Page 9
Then use this
bottle receptacle
Then use this
bottle receptacle