Safety Precautions-Electrical Requirements - Whirlpool 7LIECK-W-WL User Manual

Cold and room temperature bottle water cooler
Table of Contents

Advertisement

Position the back of the dispenser no closer than 4 inches from the wall and permit free
airflow between the wall and the dispenser. There must be at least 4 inches clearance on the
sides of the dispenser to permit airflow.
Service should only be performed by a certified technician. Please contact us at
1-855-5WHIRL5 for assistance.
SAFETY PRECAUTIONS ---Electrical Requirements
WARNING
!
Electrical Shock Hazard
Plug into a grounded and properly wired 3-prong outlet.
Do not remove the ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
A 120 volt, 60 Hz., AC only, 15 amp, fused electrical supply is required. A time-delay fuse or circuit
breaker is recommended.
If codes permit and a separate ground wire is used, it is recommended that a qualified electrician
determine that the ground path is adequate.
Check with a qualified electrician if you are not sure if the water cooler is properly grounded.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-855-5WHIRL5 for assistance.
Model # 7LIECK-W-WL: Page 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents