Table of Contents
Advertisement
Figure 54. Loosening the processor bracket
4. Lift the bracket and the processor away from the heat sink, and place the processor connector side down on the processor
tray.
5. Flex the outer edges of the bracket to release the bracket from the processor.
NOTE:
Ensure that the processor and the bracket are placed in the tray after you remove the heat sink.
Figure 55. Removing the processor bracket
Next steps
Install the processor into the processor and heat sink
Installing the processor
Prerequisites
Follow the safety guidelines listed in
56
PowerEdge C4140 installing and removing system components
module..
Safety instructions
on page 23.
Advertisement
Table of Contents
