System Board Jumper Settings - Dell EMC PowerEdge C4140 Installation And Service Manual

Table 15. System board jumpers and connectors (continued)
Item Connector
4 J_FAN1U_6
5 J_INTRUSION_DET1
6 J_FAN1U_5
7 GPU_5_PWR
8 PLX_PWR (PCIe_Switch_board)
9 GPU_6_PWR
10 J_FAN1U_4
11 J_FAN1U_3
12 J_FAN1U_2
13 J_FAN1U_1
14 GPU_7_PWR
15 B6, B12, B5, B11, B4, B10, B7, B1, B8, B2, B9, B3
16 CPU2
17 SATA PWR
18 M4
19 M3
20 M2
21 M1
22 J_USB_INT
23 J_RISER2
24 J_NDC
25 S1
26 S2
27 S3
28 J_TPM_MODULE1
29 BATTERY
30 J_R1_SS82_2
31 CMOS_CLR
32 OMNIVU_LED1
33 S4
34 CPU1
35 A6, A12, A5, A11, A4, A10, A7, A1, A8, A2, A9, A3

System board jumper settings

For information on resetting the password jumper to disable a password, see the
102 Jumpers and connectors
Description
Cooling fan connector 3
Intrusion switch connector
Cooling fan connector 4
GPU 5 power connector
Switch board power connector
GPU 6 power connector
Cooling fan connector 5
Cooling fan connector 6
Cooling fan connector 7
Cooling fan connector 8
GPU 7 power connector
Memory module sockets
Processor socket 2
SATA power connector
Data connector 4
Data connector 3
Data connector 2
Data connector 1
Internal USB port
Riser 2 connector
Network Daughter Card connector
SAS connector 1
SAS connector 2
SAS connector 3
TPM module connector
Battery connector
Riser 1 connector
CMOS clear/NVRAM clear jumpers
System board diagnostic LED indicators (7)
SAS connector 4
Processor socket 1
Memory module sockets
Disabling a forgotten password section.