Air shroud
Removing the air shroud
Prerequisites
Never operate your system with the air shroud removed. The system may get overheated, resulting in shutdown of the system
and loss of data.
1. Follow the safety guidelines listed in
Safety instructions
on page 23.
2. Follow the procedure listed in
Before working inside your system
on page 24.
Steps
1. Holding the blue touch points, lift the air shroud out of the system.
Figure 26. Removing the system air shroud for B, C, G, K and M configurations
2. Holding the blue touch points, lift the NVLink air shroud from the NVLink board.
PowerEdge C4140 installing and removing system components
29