Battery; Charging - Fujitsu LOOX600 User Manual

SECTION 1

3 Battery

This device can operate on external power through the AC adapter or on its
internal battery. To use this device with the battery, it is necessary to charge it
beforehand. Also, while this device is operating, if low battery indicator is
displayed at the top right of the screen, recharge the battery soon. For details on
the meaning of the icons displayed, see "Status Icons" .

Charging

There are two ways to charge this device: with the cradle and with the AC adapter.
When using this device for the first time, read "Preparations for using this device for the
first time" and switch the battery switch On.
Charging with the Cradle
Set this device in the cradle to charge its battery.
As in the figure, (1) Connect the AC adapter to the cradle, (2) Connect the power cable
to the AC adapter, (3) Plug in the other end of the power cable to the socket, (4) Place
this device in the cradle.
Direct Charging
You can also charge by connecting the AC adapter to this device.
As in the figure, (1) Connect the AC adapter to DC-IN connector of this device, (2)
Connect one end of the power cable to the AC adapter, (3) Plug the other end of the
power cable into the socket.
10
Power cable
(4)
Cradle
(3)
AC adapter
(2)
(1)