Table of Contents
Advertisement
9
(1) Input the "User name" and "Password" for connecting to the Internet
service provider. (2) Tap OK.
If necessary, tap "Store password" to select it
For the information for connecting, see the material provided by your Internet
service provider.
Critical Point
If you are requested on the cell phone or CF side to input the pass key
On some models, you may be requested to input the pass key. If this happens, input the pass
key on the cell phone or CF side, input the same pass key on this device too, then tap "OK".
When this device is connected to the Internet, Pocket Internet Explorer is started
up automatically.
Connection Using Wireless Station
This method uses a Bluetooth
connect to the Internet via a LAN.
→ "Settings" → "Connection" tab → "Connection" in that order.
1
Tap
2
Execute "Connecting through a LAN card" from step 8 onward and make the
proxy settings.
3
Start up Pocket Plugfree and tap the wireless station from the device list
screen.
4
Input the pass key, then tap OK.
5
From the displayed services, tap "Internet".
6
(1) Input the "user name", "password", and "domain" for logging onto the
LAN. (2) Tap
For details on the information for logging in, check with the network administrator.
7
Input the pass key, then tap OK.
When this device is connected to the Internet, Pocket Internet Explorer is started
up automatically.
156
TM
wireless station (Bluetooth
.
.
TM
data access point) to
Advertisement
Table of Contents
