Automatic Storage Device Startup/Inf File Editor - Fujitsu LOOX600 User Manual

Automatic Storage Device Startup/Inf File Editor

Automatic storage device startup refers to the following three applications for
automatically starting up the application in a CF card or SD/MMC card when it is set in
this device.
• Automatic startup editing tool: Creates the automatic startup file (autorun.inf).
• Automatic startup setting tool: Sets whether or not to start up programs from cards
automatically.
• Automatic startup tool: Reads in the automatic startup file from the card and runs the
application on the card or in the main memory.
Critical Point
The only applications that can be started automatically are executable files. If you set a card
containing only data files, the application related to the files is not started.
Creating the Automatic Startup File
Automatically starting up a CF/SD/MMC card application requires the automatic startup
file (autorun.inf). The automatic startup editing tool is used to set the automatic startup
file.
1 Load the CF card/SD/MMC card containing the application.
Write enable the card before setting it.
→ "Applications" → "Inf File Editor" in that order.
2 Tap
107