SECTION 1
1 Notice Concerning Usage
Please watch out for the following, which can cause malfunction and accidents.
Handling Precautions
•
Do not subject this device to mechanical shock or vibration.
•
Do not disassemble this device.
•
If this device is used a prolonged periods of time, the temperature of the surface of this device
rises and becomes hot when you touch. This is because heat radiates from the device as a
whole once the temperature within the device reaches a certain level. It does not signal
breakdown of the device.
Locations to Avoid for Usage and Storage
Avoid using this device in locations such as the following.
•
Locations with extremely high or low temperatures
Operating temperatures of this device is 0 ~ 40°C and storage temperatures is –25 ~ 60°C
•
Locations subject to direct sunlight
•
Locations subject to mechanical shock or vibration
•
Excessively dusty locations
•
Locations where water or any other liquid might get on this device
•
Locations with high humidity
•
Locations where Bluetooth
trains, etc.)
How to Stop the Bluetooth
In locations such as hospitals, aircraft, and crowded trains, where Bluetooth
could be harmful, either switch Off the power for this device and stop using it or use this
device with its Bluetooth
To stop the Bluetooth
side of the device as shown in the following figure to the Off side.
2
TM
signals could be harmful (hospitals, within aircraft, in crowded
TM
Functions
TM
functions stopped.
TM
functions of this device, slide the Bluetooth
TM
signals
TM
switch on the right