Charging The Main Battery - Fujitsu IPAD100-20 Operation Manual

Draft
1.2.2

Charging the main battery

Charge the main battery the first time that you use it or when the battery charge
is low.
You can charge the main battery with any of the following methods:
Mounting the iPAD on the cradle with the main battery mounted in the iPAD
Using a single-pack charger
Connecting two cradles for simultaneous charging of two batteries
Connecting the single-pack charger and the cradle for simultaneous charging
CAUTION
Do not unplug the AC adapter before
charging has been completed.
Use only the cradle, AC adapter, and
single-pack charger designed for the
iPAD to prevent damage to the iPAD
resulting from product differences such
as voltage or current requirements.
Note
It is best to charge a battery at room
temperature (from 50
The cradle, AC adapter, or single-pack
charger may become slightly hot. This
is not a malfunction.
For information about the single-pack charger, see the "iPAD Single-pack Charger
7080) User's Guide."
Charging the main battery using the cradle (IPAD142-01)
You can use one of three methods to charge the main battery when you mount the iPAD on
the cradle. The first method uses one cradle to charge one iPAD. The second method uses
two cradles connected with a daisychain cable to charge two iPAD units simultaneously. The
third method uses one cradle and one single-pack charger connected with a daisychain cable
to simultaneously charge a battery and the iPAD.
<Using one cradle>
Using the cradle, you can charge one battery installed in the IPAD.
A cradle (IPAD142-01) and an AC adapter (CA05306-D500) are required for this operation.
o o
F to 86 F).
14
(CA05951-