Lx-Backup - Fujitsu LOOX600 User Manual

Starting Manually
→ "Settings" → "System" tab → "Autorun" in that order.
1 Tap
2 Tap "Re-execute".
The "Application Selection" screen is displayed.
3 (1) Tap the automatic startup file for the program to start. (2) Tap "Execute".
The application called in the automatic startup file is started.

LX-Backup

LX-Backup is an application that backs up the data on this device's RAM to a CF card
or SD/MMC card. If the memory in this device is ever cleared, for example by a full
reset, you can restore your data from this backup data.
Important
Contents set for "Inbox" "Service"
Some of the contents set for "Inbox" "Service" can not be backed up to a memory card.
Therefore, the contents of "Service" can not be fully recovered even by restoring the data.
Write down the contents of "Service" on a piece of paper ahead of time. After a restoration,
create a new service with the contents you wrote down, then use that new service from then
on.
Backing up
1 If possible, connect the AC adaptor.
For details on connecting the AC adaptor, see "Charging".
If the AC adaptor can not be used, check that the remaining battery capacity is
adequate.
2 Close any programs that are running.
For details on how to close applications that are running, see "Closing Applications" .
3 Set the CF card/SD/MMC card in place.
For details on how to set the CF card/SD/MMC card in place, see "7 Installing
Expansion Units".
Critical Point
Checking the contents of a card
Use File Explorer to check the contents of the CF card, SD/MMC card and check that it is OK
to store backup data on the card. The contents of the backup card can not be checked from
the LX-Backup Tool screen.
109