Setting The Password - Fujitsu LOOX600 User Manual

Setting the Password

→ "Settings" → "Personal" tab → "Password" in that order.
Tap
The following screen is displayed.
1 No password is set.
2 You can set a four-digit number as the password by tapping the key pad
displayed on the screen.
3 You can set a password of at least 7 characters that must combine letters
(uppercase and lowercase) and delimiters (-, -, etc.)
4 If this device is left unused for a specific period, the password input screen is
displayed.
5 Tap here to re-input the password.
Critical Point
Do not forget your password.
If you forget your password, you will need to fully reset this device (which erases all your
data).
1
2
3
4
5
169