Kenwood NX-3720HG Service Manual page 118

Item Condition
Panel tuning
mode
6. 1) Adj item:
Low RSSI [An LRSSI]
Adjust:[****]
2) Adj item:
[L1]→
[L5]→
[C3]→
[H2]→
[H6]
SSG output:
-118dBm
(0.28μV)
(MOD: 1kHz/
±1.5kHz)
7. 1) Adj item:
High RSSI [An HRSSI]
Adjust:[****]
2) Adj item:
[L1]→
[L5]→
[C3]→
[H2]→
[H6]
SSG output:
-80dBm
(22.4μV)
(MOD: 1kHz/
±1.5kHz)
1-118 (No.RA054<Rev.001>)
PC test mode Test-
equipment
1) Adj item: SSG
[Low RSSI (Analog
Narrow)]
2) Adj item:
[Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
SSG output:
-118dBm (0.28μV)
(MOD: 1kHz/
±1.5kHz)
1) Adj item: SSG
[High RSSI
(Analog Narrow)]
2) Adj item:
[Low1]→
[Low5]→
[Center3]→
[High2]→
[High6]
SSG output:
-80dBm (22.4μV)
(MOD: 1kHz/
±1.5kHz)
Measurement
Unit Terminal Unit
Panel ANT Panel
Ext. SP
connector
Panel ANT Panel
Ext. SP
connector
Adjustment
Parts Method
[Panel tuning mode]
After input signal from
SSG, press [ ]
button to store the
adjustment value.
[PC test mode]
After input signal from
SSG,
1) Press [Acquire
Monitored Value]
button.
2) Press [Apply]
button to store the
adjustment value.
[Panel tuning mode]
After input signal from
SSG, press [ ]
button to store the
adjustment value.
[PC test mode]
After input signal from
SSG,
1) Press [Acquire
Monitored Value]
button.
2) Press [Apply]
button to store the
adjustment value.
Specifica
tions
/Remarks