Kenwood NX-3720HG Service Manual page 113

4.26.1 Necessary Deviation adjustment item for each signaling and mode
The following shows the necessary adjustment items for each signaling deviation. Please read the following table like the following
example. In the case of the signaling "QT (Analog Wide)", this signaling is composed of three elements [Balance, Maximum Deviation
(Analog Wide) and QT Deviation (Analog Wide)]. Please adjust Balance and Maximum Deviation (Analog Wide) before adjusting QT
Deviation (Analog Wide).
Mode Signaling
Analog Audio 1. Balance adjust
2. Maximum Deviation
[Analog Wide]
QT 1. Balance adjust
2. Maximum Deviation
[Analog Wide]
3. QT Deviation [Analog Wide]
DQT 1. Balance adjust
2. Maximum Deviation
[Analog Wide]
3. DQT Deviation [Analog Wide]
LTR 1. Balance adjust
2. Maximum Deviation
[Analog Wide]
3. LTR Deviation [Analog Wide]
DTMF 1. Balance adjust
2. Maximum Deviation
[Analog Wide]
3. DTMF Deviation [Analog Wide]
2TONE 1. Balance adjust
2. Maximum Deviation
[Analog Wide]
3. Single Tone Deviation [Analog
Wide]
MSK 1. Balance adjust
(Fleet 2. Maximum Deviation
sync) [Analog Wide]
3. MSK Deviation [Analog Wide]
NXDN Audio
CWID
DMR Audio
• Balance is common with all the above deviation adjustments. If Balance (Transmitter Section 6) has already adjusted, please skip
Step1 and adjust from Step2.
• Maximum Deviation (Analog Wide/Narrow) is common with all the analog signaling deviations and CWID Deviation (NXDN Very
Narrow).
If Balance and Maximum Deviation (Analog Wide /Narrow) (Transmitter Section 7) have already adjusted, please skip Step2 and
adjust from Step3.
Necessary adjustment and order
Wide
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. QT Deviation [Analog Narrow]
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. DQT Deviation
[Analog Narrow]
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. LTR Deviation [Analog Narrow]
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. DTMF Deviation [Analog Narrow]
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. Single Tone Deviation
[Analog Narrow]
1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. MSK Deviation
[Analog Narrow]
- 1. Balance adjust
2. NXDN High Deviation
[NXDN Narrow]
-
- 1. Balance adjust
2. DMR High Deviation
Narrow
1. Balance adjust
2. NXDN High Deviation
[NXDN Very Narrow]
- 1. Balance adjust
2. Maximum Deviation
[Analog Narrow]
3. CWID Deviation
[Analog Narrow]
Very Narrow
-
-
-
-
-
-
-
-
(No.RA054<Rev.001>)1-113