Measurement Choice; Combined Co 2 / O 2 Measurement - Pentair HAFFMANS c-DGM Instruction Manual

6.2

*Measurement choice

For the c-DGM you can select one of the following measurement programs from the
"Measurement choice" menu:
1) Combined CO / O
2
2) Only CO measurement
2
3) Only O measurement
2
4) Continuous O measurement
2
5) Combined CO / TPO measurement
2
6) TPO measurement
These measurement programs are explained in more detail in the related sub-sections.
The following steps take you to the "Measurement choice" menu:
1. Press "Enter" until the Haffmans logo appears.
In addition to the software version, the display shows the serial number of the c-
DGM.
2. Press "Enter" again.
This takes you to the main menu.
3. Use the arrow buttons to select the "Measurement choice" menu and then press "Enter"
to open the menu.
4. Use the arrow buttons to select one of the measuring programs that are displayed.
Page 32 of 78
measurement
2
, &&D E^ 'D 'D
c-DGM/i-DGM