4.
General product information
4.1
General description
The DGM has two types of controls.
1. Push buttons on the top of the instrument.
2.
Four mechanical component, consisting of:
the handle (pos. 20),
the throttle valve (pos. 12), and
the two hose connectors for the sampling hoses.
The instrument consists of 4 components that form a single assembly (see Appendix VII,
drawing c-DGM).
A. The electronics housing (pos. 01);
B. The measurement chamber (pos. 02);
The battery pack (pos. 11);
C.
D. The plunger block (pos. 06);
c-DGM/i-DGM
"Enter" button
Fig. 4.2 Control buttons
, &&D E^ 'D 'D
1
2
Fig. 4.1 Service levels
Page 15 of 78