Time Settings; Date; Time; Shut-Off Time - Pentair HAFFMANS c-DGM Instruction Manual

5.4

Time settings

You can change the various time settings by means of the "Date/Time/Display" menu of the
DGM.
The following steps take you to the "Date/Time/Display" menu:
1. Press "Enter" until the Haffmans logo appears.
2. Press "Enter" again.
This takes you to the main menu.
3. Use the arrow buttons to select the "Configuration" menu and then press "Enter" to open
the menu.
4. Use the arrow buttons to select the "Date/Time/Display" menu and then press "Enter" to
open the menu.
5. Now you can select the various submenus with the arrow buttons; use the "Enter" button
to select "Date", "Time", "Shut-off time", "Display contrast", "Display times" or the main
menu.

5.4.1 Date

The arrow buttons can be used to alter the date. Press "Enter" to go from the day to the month
and then to the year. Press "Enter" again to return to the "Date/Time/Display" menu.

5.4.2 Time

You can use the arrow buttons to change the numbers of the time; press "Enter" to switch from
hours to minutes to seconds. Press "Enter" again to return to the "Date/Time/Display" menu.

5.4.3 Shut-off time

The DGM switches itself off automatically if no buttons are pressed for a certain length of time.
This "shut-off time" can be adjusted with the arrow buttons; press "Enter" to return to the
"Date/Time/Display" menu.

5.4.4 Display contrast

The display contrast can be adjusted using the arrow buttons. Press "Enter" to return to the
"Date/Time/Display" menu.
c-DGM/i-DGM
, &&D E^ 'D 'D
Page 21 of 78