Advertisement
Step 3:
Connect the High Level Sensor Assembly to the Hopper top (pre-drilled holes).
• Use a crescent wrench to remove the plastic plug on the side of the Hopper.
• Thread in the Low Level Sensor.
• Carefully connect the High and Low Level Sensor Cables to the end of each Sensor.
HIGH SENSOR
LOW Level Sensor
Conveyor Control bottom
Step 4:
Connect the High and Low level Sensor Cables to the bottom of the Conveyor Control.
• Ensure HIGH SENSOR (located on top of the inlet) is connected to the sensor connec-
tion on the bottom of the control box marked: BIN HIGH SENSOR.
• Connect LOW SENSOR (located on the side of the hopper) is connected to the sensor
connection on the bottom of the control box marked: BIN LOW SENSOR.
Continued
HIGH Level Sensor
41
LOW SENSOR
Advertisement
