Advertisement
REMOVE
Integrated Aspiration
• Only clean and dust-free seed should be used in the treating process.
• An exhaust unit supplied by the customer must be connected to a central aspiration system.
• Recommended aspiration: 500-600cfm.
• The six inch OD connection for the exhaust unit is located on the Doghouse (discharge end of drum).
Step 1:
Use a 5/16" socket to remove the four (4) 10-32 hex head bolts and washers.
• Remove the Dust Collection Plate and Cover.
Step 2:
Remove the Doghouse Cover.
Step 3:
Replace the Dust Collection Plate and securely fasten the four (4) 10-32 washers and bolts.
This completes Drum Installation.
12
Advertisement
