Advertisement
CONVEYOR CONTROL
Required assembly tools
• 7/16" Socket Head Wrench (2)
Optional Conveyor Control Kit
The Conveyor Control Kit ships from the factory in a separate box.
• Remove from packaging and attach to the Treater Frame.
Step 1:
Two (2) Male connectors are provided with the kit (located inside the Conveyor Control).
• Wire them to the INFEED and OUTFEED conveyor wire leads.
Step 2:
Locate the Elevator Control on or near the treating head assembly (Elevator Control is mounted to the Mount Plate
from the factory (can be remote mounted).
• Fasten the Plate in place using the following order: bolt+[Mount Plate+Frame]+washer+lock nut.
• Use a 7/16" Socket Head Wrench to securely tighten.
Continued
40
Advertisement
