Advertisement
CALIBRATION KIT
Required assembly tools
• 7/16" Socket Head Wrench (2)
• Tube Cutter
Optional Calibration Kit
Step 1:
Agitation Motor Base with factory supplied hardware in this
order:
• bolt+[Tank Motor Mount + Calibration Mount Plate]+wiz
• Tighten securely.
Step 2:
• Press it into the 1/2" Male Run Tee (attached to the
Continued
27
Connect the Calibration Mount Plate to the Tank
nut.
Cut a 3" piece of 1/2" Tubing.
bottom of the Calibration Cylinder) as shown.
Advertisement
