Advertisement
Step 5:
Connect one end of 1/2" Recirculation Tube to the 1/2" Male Run Tee located underneath the Calibration.
Step 6:
Cut to fit and connect the other end of the Vent Tube to the Press-lock Fitting on the pump, located underneath the
CBP Tank.
Step 7:
Remove the second Vent Plug from the top of the CBP Tank.
• Cut a 2" piece of 1/2" Tubing.
• Press it into the 1/2" Vent Press-lock Fitting.
Continued
29
Advertisement
