Advertisement
Step 10:
Cut to fit and connect the remaining piece of 1/2" Tubing to the 90° elbow press-lock fitting, located on top of the
Calibration Tube.
Step 11:
Connect one end of the 1/2" Vent Tube to the 1/2" Union Tee.
VENT TUBE
31
Step 12:
Cut to fit and connect the other end of the Vent
Tube to the 1/2" Press-lock Fitting on the pump, located
underneath the Tank.
This completes the Top Mount Calibration Kit
Installation.
Advertisement
