Register Map; Figure 10-1. Bq79616 Gui Register Map Page - Texas Instruments BQ79616-Q1 User Manual

www.ti.com

10 Register Map

The register map page displays all relevant writeable and readable registers for any devices being used. The
registers are grouped by general function, that is measurements, protection, and so forth. If there are multiple
connected devices, the device being displayed can be switched with a drop-down menu at the top of the page.
10.1 Register Display
In the register display, registers are displayed with their names, addresses, and values. Double clicking on any
bit flips the value and immediately writes it to the corresponding register. In Deferred Write mode, register writes
can be queued up and executed by pressing either write button. Upon selecting a register, an information button
next to the register name appears. Clicking on the button reveals more about the selected register, including the
default value and information about the fields within the register.
A field view also opens up on the right side of the screen that allows the user to directly edit certain register
fields. Selecting a field in the field view also displays an information button. Clicking on it displays the name of a
field, the bits it occupies within the register, and its type.
SLUUC36 – DECEMBER 2020
Submit Document Feedback

Figure 10-1. BQ79616 GUI Register Map Page

Copyright © 2020 Texas Instruments Incorporated
BQ79616-Q1 and BQ75614-Q1 GUI User's Guide
Register Map
25