Concept2 RM3230 Instructions Manual page 33

Food proccessor with juice extractor
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31
EN
CUTTING
WARNING!
• Prior to any cleaning or change of attachments, make sure the switch is in the OFF position and that the feed
cord is disconnected from the socket.
• Take extra care while handling sharp parts.
• Make sure the safety lid and the working bowl lid are correctly fitted. Use all safety switches and devices.
• Never fit cutting extensions on the lower drive shaft without ensuring the working bowl is in place! First fit the
working bowl on the motor part and then insert the cutting extensions.
INSTRUCTIONS FOR PROCESSING SELECTED FOOD
Food
Meat
Onions
Nuts
Hal
Fish
Cheese
Soup
Carrots
Bread
Apples
Mayonnaise
Preparation times are informative only; they depend on specific foods and the required cutting grade.
1. Make sure the safety lid (1) is correctly fitted.
2. Fit the working bowl (13) on the motor part (5).
3. Remove the cutting blade safety cover (24) and insert the cutting blade (22) in the working bowl and fit it on
the drive centre shaft (6).
WARNING! Take care. Hold the cutting blade (22) at its upper plastic part. After use, always take the blade out
of the bowl prior to taking out the food. Always store the blade with its safety cover (24) fitted.
4. Insert food in the bowl.
5. Fit the working bowl lid (20) and turn it a little. The pin on its edge will click into the notch in the motor part and
press the safety switch. You will hear the pin clicking in.
6. Connect the feed cord into the socket.
7. Switch the motor on and set the required speed. Use the pusher to add food during the cutting process; do not
use any other objects or your hands to do so.
8. When you finish cutting, set the switch in the OFF position and disconnect the cord from the socket.
9. Open the bowl lid, remove the cutting blade by taking hold of the upper plastic part and use a spatula to clean
the blade.
10. Empty the working bowl.
11. Wash the attachments and let them dry properly.
RM3230
Quantity
Recommended motor speed
700 g
700 g
600 g
700 g
700 g
700 g
700 g
4 slices
700 g
max. 4 bunches
max. 1 000 ml
MAX
4 - 6
9 – MAX
1 – 9
1 – 9
1 – 9
6 – 9
6 – 9
9 – MAX
MAX
9 – MAX
Preparation time
10 – 20 s
10 – 20 s
10 – 20 s
10 – 20 s
10 – 20 s
20 s
20 s
10 – 20 s
10 – 20 s
10 s
20 s
31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RM3230 and is the answer not in the manual?

Questions and answers

Table of Contents