Advertisement
Quick Links
Freestanding Corner Worksurfaces
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2004 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Freestanding Corner and Extended Corner Worksurfaces
(Refer to page 2)
Freestanding, 15"x15"
L-shape corner supports,
no modesty panel
Freestanding, 15"x15"
L-shape corner supports,
full-height fixed modesty panel
Freestanding, 15"x15"
L-shape corner supports,
technology modesty panel
on 42" side, full-height fixed
modesty on the other side
Elective Elements, Walden, Garland -
Extended Corner Worksurfaces
(Refer to page 5)
Freestanding extended
corner worksurface with
pedestal and L-shape
corner support, no
modesty panel
Freestanding extended
corner worksurface with
pedestal and L-shape
corner support and full-
height flush modesty
panels
Freestanding extended
corner with pedestal and
L-shape corner support
and technology modesty
panel on pedestal side,
full-height fixed modesty
panel on 42" side
DRILL BIT
1/8"
Page 1 of 10
939500244 Rev D
Advertisement
Related Manuals for Steelcase Elective Elements Freestanding Corner Worksurface
Summary of Contents for Steelcase Elective Elements Freestanding Corner Worksurface
- Page 1 If you have a problem, question, or request, call panel on 42" side DRILL BIT your local dealer, or Steelcase Line 1 at 1/8" 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
- Page 2 FREESTANDING CORNER WORKSURFACE Assemble the L-shape corner support. a) Insert (3) shoulder screws into the holes in panel as shown. b) Align with adjacent panel and insert the shoulder screws into the clips. SHOULDER c) Push the panel downward, SCREWS d) until shoulder screw is securely seated.
- Page 3 CONNECTING BOLTS Turn corner worksurface over onto a clean, soft material. Insert connecting bolts into predrilled holes. The quantity depends on the depth of end panel used. Lower assembled panels onto connecting bolts. TIP: Place a shim under carpet to allow a finger hold when assembled unit is ready to upright.
- Page 4 Secure panels to worksurface. a) Insert cam locks into holes as shown. b) Make sure the arrow on the cam locks are pointing toward the bolt. c) Turn the cam locks 1/4 turn to secure all connections. Two persons carefully turn assembly over and adjust leveling glides as needed.
- Page 5 FREESTANDING EXTENDED CORNER WORKSURFACE Assemble the L-shape corner support. a) Insert (3) shoulder screws into the holes in panel as shown. b) Align with adjacent panel and insert the shoulder screws into the clips. c) Push the panel downward, d) until shoulder screws are securely seated. SHOULDER SCREWS Assemble the L-shape end panel...
- Page 6 CONNECTING BOLTS Turn corner worksurface over onto a clean, soft material. Insert connecting bolts into predrilled holes. The quantity depends on the depth of the end panel used. Lower assembled panels onto connecting bolts. TIP: Place a shim under carpet Refer to assembly direction 939500237 to allow a finger hold when for installation of pedestal.
- Page 7 Secure panels to worksurface. a) Insert cam locks into holes as shown. b) Make sure the arrow on the cam locks are pointing toward the bolt. c) Turn the cam locks 1/4 turn to secure all connections. Two persons carefully turn assembly CAM LOCK over and adjust leveling glides as needed.
- Page 8 FULL HEIGHT MODESTY PANEL Install bracket to Align panel to panel bracket as outside of panel shown, then attach to the L-shape corner support. Insert (2) additional connecting bolts for the modesty panel into predrilled holes. Lower the L-shape end panels onto PANEL TO PANEL BRACKET worksurface and secure with cam locks.
- Page 9 CAM LOCK Lower modesty panel to worksurface and secure with (2) cam locks. MODESTY PANEL Install L-shape corner support. Drill (2) pilot holes through end panel in the locations marked "X", and secure to modesty panel with (2) screws. Two persons carefully turn assembled unit over and level as needed.
- Page 10 Center catch side to side in kneespace. TECHNOLOGY MODESTY PANEL Route wires as needed. Install goose-neck catch in the location shown. GOOSE Install a modesty panel bracket on NECK CATCH the bottom of the pedestal, and on the end panel. Place shoulder screws into brackets Locate (2) pilot holes on pedestal on unit and pivot modesty panel up.
Need help?
Do you have a question about the Elective Elements Freestanding Corner Worksurface and is the answer not in the manual?
Questions and answers