Steelcase Elective Elements Freestanding Corner Worksurface Manual page 2

FREESTANDING CORNER WORKSURFACE
1.
Assemble the L-shape corner support.
a) Insert (3) shoulder screws into the holes
in panel as shown.
b) Align with adjacent panel and insert the
shoulder screws into the clips.
c) Push the panel downward,
d) until shoulder screw is securely seated.
2.
Assemble two L-shape end panels
in the same manner.
Note: if a Full-height Modesty Panel is used,
go to page 8. For a Technology Modesty
Panel, go to page 10.
2
L-SHAPE END PANELS
L-SHAPE CORNER SUPPORT
1a
SHOULDER
SCREWS
1c
1b
1d
Page 2 of 10
939500244 Rev D