Advertisement
Quick Links
®
Specific Solution for Answer
Curved Corner Worksurface
Mounted on Pathways
®
Supports
®
Bit Holder
#3 Square Drive Bit
#3 ACR3
Phillips Driver
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2001 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Page 1 of 6
Printed in U.S.A.
939504848 Rev B
Advertisement
Related Manuals for Steelcase Specific Solution for Answer Curved Corner Worksurface
Summary of Contents for Steelcase Specific Solution for Answer Curved Corner Worksurface
- Page 1 #3 ACR3 Phillips Driver If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
- Page 2 Worksurface Supports-Parts List Screw "A" Stretcher - P/N J355533SR (must order separately). #3 Square Drive 2 required per corner unit. #12 Self-Drilling For Wood-Core Worksurface Screw "B" 1/4-20 Self-Tapping For Metal Parts #3 Square Drive Rear Support Screw "C" (must order separately). 10-10 X 1 Pan Head 1 required per corner unit.
- Page 3 Intermediate Support - LH Intermediate Support - RH Review Complete Leg and Stretcher Assembly Drawing on page 5 to Determine Left or Right Hand Bracket Mounting for 'C' Legs and Intermediate Supports. Connect (1) plate 'G' and (1) bracket 'E' to each Intermediate Support with (7) Page 3 to 6 screws 'B'.
- Page 4 'C' Leg - RH 'C' Leg - LH Review Complete Leg and Stretcher Assembly Drawing on page 5 to Determine Left or Right Hand Bracket Mounting for 'C' Legs and Intermediate Supports. Connect (1) bracket 'D' and (1) plate 'H' to each 'C' Leg with 4 screws 'B'.
- Page 5 Screw 'B' 'C' Leg 'C' Leg Intermediate Support Intermediate Support Stretcher P/N J355533SR Rear Support Using Type 'B' screws (28), secure stretchers to brackets/supports and legs. Insert screws from inner face of brackets: D, E and F. Align with corresponding holes at each end of stretcher. (gray holes shown in bracket drawing represent Page 5 to 6 correct bracket/stretcher connection pattern).
- Page 6 Lower Corner Worksurface onto assembled support assembly. Align pre-drilled holes in surface underside with bracket hole configuration. Fasten worksurface to Mounting Plates 'G' with (5) 'C' screws each. Attach surface to brackets 'F' with (1) 'A' screw each. Use (1) Type 'A' screw for inner flange of each bracket 'E'.
Need help?
Do you have a question about the Specific Solution for Answer Curved Corner Worksurface and is the answer not in the manual?
Questions and answers