Teledyne Linea HS Series User Manual page 97

Display Name Feature
Align Red X Shift alignRedXShift
Align Red Y Shift alignRedYShift
Direction Source sensorScanDirectionSource
Internal
Line 2
RotaryEncoder
Internal Scan sensorScanDirection
Direction
Forward
Reverse
Analog Gain AnalogGain
1
2
4
8
Gain Selector GainSelector
All Rows
System Gain
Blue
Green
Red
Black Level BlackLevel
Gain Gain
Super Resolution sensorLineSpatialCorrection
Mode
Super Resolution superResolutionMode
Mode
SR Mapped
SR Detail
Restored
SR Strength srStrength
Balance White BalanceWhiteAuto
Auto
Linea HS Series Camera User's Manual
Description
Represents a shift in sensor scanning direction (horizontal
direction on image). Range [0, 1].
Center position is 0.5.
Represents a shift in cross sensor scanning direction
(vertical direction on image), range [0, 1].
Center position is 0.5.
Direction determined by value of:
Internal SensorScanDirection
GPIO2 Pin 6 (Low: forward, high: reverse). Available when
TriggerSource is not Encoder.
Encoder Rotary encoded. Available when TriggerSource is Encoder
and rotaryEncoderOutputMode is Motion (see Digital IO
Control category).
When ScanDirectionSource is set to Internal, determines
the direction of the scan
Forward Forward scan direction.
Reverse Reverse scan direction.
Sets the analog gain.
One No gain applied.
Two 2X analog gain applied.
Four 4X analog gain applied.
Eight 8X analog gain applied.
Selects which gain is controlled when adjusting gain.
All Gain and offset applied to all channels.
System System gain will apply the gain value while maintaining the
existing gain ratios.
Blue Gain and offset applied to blue channel. (Multifield color
model only)
Green Gain and offset applied to green channel. (Multifield color
model only)
Red Gain and offset applied to red channel. (Multifield color
model only)
Controls the black level as an absolute physical value. This
represents a DC offset applied to the video signal, in DN
(digital number) units. The value may be positive or
negative.
Sets the gain as per the gain selector setting.
Sets the number of rows each color is delayed to establish
spatial alignment. Must stop acquisition to change.
Sets the super resolution mode.
srMapped Super Resolution Mapped.
srDetailRestored Super Resolution Detail Restored.
Super resolution strength. Values range from 0 to 1, in
increments of 0.01.
Executes the automatic white balance function. This
calculates the RGB gain adjustments to bring the average
of each color up to the average of the brightest color.
(Multifield color model only)
Appendix A: GenICam Commands • 97
View
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
Beginner
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner