Teledyne Linea HS Series User Manual page 106

Binning Vertical
Test Pattern
Off
Each Tap Fixed
Grey Horizontal Ramp
Grey Vertical Ramp
Grey Diagonal Ramp
User Pattern
AOI Count
AOI Selector
AOI Offset
AOI Width
Alignment Markers
Off
Vertical On
Horizontal On
Both On
Alignment Marker
Vertical Spacing
64
128
256
512
Alignment Marker
Vertical Offset
106 • Appendix A: GenICam Commands
BinningVertical
TestImageSelector
EachTapFixed
Grey Horizontal Ramp
Grey Vertical Ramp
Grey Diagonal Ramp
User Pattern
multipleROICount
multipleROISelector
multipleROIOffsetX
multipleROIWidth
alignmentMarkerEnable
Horizontal
alignmentMarkerVerticalSpacing
alignmentMarkerVerticalOffset
Number of vertically adjacent pixels to sum
together. This increases the intensity of the
pixels and reduces the vertical resolution of the
image. Only available in TDI single plane mode.
Selects the type of test image that is sent by
the camera.
Note. Grey images are displayed so that any bit
error will immediately be apparent as a color.
Off Selects sensor video to be output
Selects a grey scale value that is increased
every 512 pixels.
Selects a grey scale ramp
Selects a grey scale ramp progressively for each
row.
Selects a combination of horizontal and vertical
raps to form a diagonal grey scale.
User can define a test pattern by uploading to
the camera a PRNU file using the FileAccess >
Miscellaneous > User PRNU feature. The PRNU
coefficient will be applied to a midscale (128
DN) test image.
Contact Teledyne DALSA support for an Excel
file that can help with this.
Specifies the number of AOIs output.
Select the AOI to contorl when setting the AOI
Offset & AOI Width.
Location of the start of the AOI to be output.
Multiple of 32.
Width of the AOI, in pixels. Minimum is 96 per
lane.
For example, if there is only one AOI spread
across the 5 lanes then the minimum is 5 x 96
= 480.
Maximum of the sum of AOI width's is the
sensor width. For example, for a 16k sensor, if
there are two AOIs with the first 12k wide, then
the second can be no wider than 4k.
To assist with camera alignment, alignment
markers can be enabled in the output.
Off Disable alignment markers
Vertical Enable Vertical Alignment Markers only
Enable Horizontal Alignment Markers only
Both Enable Vertical and Horizontal Alignment
Markers
Vertical spacing between alignment markers, in
pixels.
Ver64 64 pixels between vertical alignment markers
Ver128 128 pixels between vertical alignment
Ver256 256 pixels between vertical alignment markers
Ver512 512 pixels between vertical alignment markers
Pixel count before first vertical alignment
marker.
Integer between 0 and
alignmentMarkerVerticalSpacing value.
Linea HS Series Camera User's Manual
Beginner
Beginner
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC