Teledyne Linea HS Series User Manual page 91

Display Name Feature
Refresh BIST deviceBIST
LED Color deviceLEDColorControl
Off
Red
Green
Waiting for EXSYNC
Thermal Shutdown
Looking for link
Busy
Temperature DeviceTemperature
Refresh refreshTemperature
Temperature
Input Voltage deviceInputVoltage
Refresh Voltage refreshVoltage
Power-on User Set UserSetDefaultSelector
Factory Set
UserSet1
UserSet2
UserSet3
UserSet4
UserSet5
UserSet6
UserSet7
UserSet8
UserSet9
UserSet10
UserSet11
UserSet12
UserSet13
Linea HS Series Camera User's Manual
Description
Command to perform an internal test which will determine
the device status. (W)
Select the mode for the LED
Off Off
Red BIST error.
Green Operational.
Fast_Green 4 Hz Green.
Medium_Red 2 Hz Red.
Slow_Green 1 Hz Green.
Medium_Orange 2 Hz Orange.
Displays the internal operating temperature of the camera, in
Celsius. (RO)
Press to update DeviceTemperature.
Displays the input voltage to the camera at the power
connector (RO)
Press to update deviceInputVoltage.
Selects the camera configuration set to load and make active
on camera power-up or reset. The camera configuration sets
are stored in camera non-volatile memory. (RW)
Factory Load factory default feature settings
UserSet1 Select the user defined configuration UserSet 1 as the Power-
up Configuration.
UserSet2 Select the user defined configuration UserSet 2 as the Power-
up Configuration
Select the user defined configuration UserSet 3 as the Power-
UserSet3
up Configuration
UserSet4 Select the user defined configuration UserSet 4 as the Power-
up Configuration.
UserSet5 Select the user defined configuration UserSet 5 as the Power-
up Configuration.
UserSet6 Select the user defined configuration UserSet 6 as the Power-
up Configuration.
UserSet7 Select the user defined configuration UserSet 7 as the Power-
up Configuration.
UserSet8 Select the user defined configuration UserSet 8 as the Power-
up Configuration.
UserSet9 Select the user defined configuration UserSet 9 as the Power-
up Configuration.
UserSet10 Select the user defined configuration UserSet 10 as the
Power-up Configuration.
UserSet11 Select the user defined configuration UserSet 11 as the
Power-up Configuration.
Select the user defined configuration UserSet 12 as the
UserSet12
Power-up Configuration.
UserSet13 Select the user defined configuration UserSet 13 as the
Power-up Configuration.
Appendix A: GenICam Commands • 91
View
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner
DFNC
Beginner